ATEX and IECEx – Regulations and Technical Information
This section provides technical information on ATEX and IECEx regulations, certification and standards for electrical and non-electrical equipment intended for use in potentially explosive atmospheres.
MIBEX offers practical explanations of equipment requirements, types of protection, Ignition Hazard Assessments and conformity assessment procedures.
ATEX and IECEx Regulations and Certification
ATEX Directive 2014/34/EU (ATEX 114)
The European product directive for equipment and protective systems intended for use in potentially explosive atmospheres. Including information on equipment categories, technical requirements and conformity assessment procedures.
IECEx 02 – International Certification
The international certification scheme for electrical and non-electrical Ex equipment, including ExTRs, QARs and Certificates of Conformity (CoCs).
IECEx 03 – Service Facility Certification
Certification of companies providing services related to explosion-protected equipment, including repair and overhaul according to IEC 60079-19.
ATEX and IECEx: What Are the Differences?
An explanation of the differences between ATEX and IECEx regarding legislation, certification, technical requirements and international acceptance.
Electrical and Non-Electrical Ex Equipment
Electrical ATEX and IECEx Equipment
An overview of electrical types of protection, including Ex d, Ex e, Ex i, Ex p, Ex m and Ex t, and the relevant IEC 60079 standards.
Requirements for non-electrical equipment according to EN ISO 80079-36/-37, including Ignition Hazard Assessments, types of protection and Ex h marking.
An explanation of ATEX equipment categories, gas and dust groups, temperature classes, Equipment Protection Levels (EPLs) and Ex markings.
From EN 13463 to EN ISO 80079-36/-37
The transition from the former EN 13463 standards to EN ISO 80079-36/-37 and its implications for mechanical equipment and technical documentation.
Practical Information and Reference Materials
Determining maximum surface temperatures and service temperatures to support temperature classification, material selection and additional testing requirements.
A practical reference booklet with a graphical installation guide based on EN IEC 60079-14. Available free of charge in both English and Dutch.
Technical Advice and Further Information
MIBEX supports manufacturers and machine builders with ATEX and IECEx requirements, from Ignition Hazard Assessments and design support to technical documentation and certification assistance.
Explore our ATEX and IECEx services or contact us to discuss your requirements.